Home Improvement

Why is my Whirlpool washing machine not starting?

Washer needs a reset: Resetting the machine can cycle its power, enabling it to start again. Unplug the washing machine or turn off its power at the circuit breaker. After one minute, restore power and try starting the washer.

What would cause a Whirlpool washer not to start?

A damaged power cord could also prevent the washer from starting.

Why is my washing machine on but not starting?

First, make sure the power is on and that the machine is plugged in. You should check the outlet to make sure it’s working. Then, check if a fuse is blown or a circuit breaker thrown. If those both work, see if the Delay Start button or Control Lock feature has been activated.

How do you reset a Whirlpool washing machine?

Follow these steps to reset your Whirlpool washer:

  1. Turn the washing machine off using the control panel.
  2. Unplug the washing machine.
  3. Wait three minutes.
  4. Plug the washer back in, and wait thirty seconds before turning the washer on.


Why did my Whirlpool washer stop working?

Some of the most common faults that will make your washer stop mid cycle include thermostat failure, problems filling up with water for the rinse cycle, or even pump problems that prevent your washer from draining. One thing that you can check yourself is the lid switch.

How do you start a Whirlpool washing machine?

Select the options on the right press. Start each cycle is designed for a specific type of garment the washer could make a gentle agitation in some of them to take better care of your clothes.

Is there a reset button on a washing machine?

Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. Causes that lead to these problems include power spikes, imbalanced loads or an interruption in power. Some machines have a button you push to reset its motor.

How do I troubleshoot my Whirlpool washer?

While troubleshooting a Whirlpool top load washer, check the washer tub’s agitator by turning on the washer, opening the lid and seeing if it moves. Remove a faulty agitator and inspect for damage. Replace damaged components with parts from an agitator repair kit. If the washer has a belt drive, inspect the drive belt.

How do I reset my washing machine?

Washer Won’t Start — Washing Machine Troubleshooting ·

How do I reset my washing machine?

The machine gives you 30 seconds to lift the lid and close. It six times and once you start lifting the lid. You have 12 seconds to do the six repetitions.

What would cause a washing machine to stop working?

There are a few possible reasons for this: – The locking mechanism could have jammed (maybe some clothes have gotten in the way). – There could be a glitch in the washer’s computer. – The washing machine may not be draining properly, leaving the washer door locked and the drum filled with water.

What to do when washing machine is not working?

Most of these front load washers have an emergency release on the door lock assembly and to access it if your washer has a bottom kick panel. You can take that bottom panel off typically.

How do you troubleshoot a washing machine problem?

Washer Troubleshooting Guide

  1. Check that the washer is plugged in securely.
  2. Check the circuit breaker or fuse box.
  3. Test the outlet for current.
  4. Check that the water supply valves are turned on.
  5. Inspect the filter screens.
  6. Test for overheating.
  7. Test the water level switch.
  8. Test the timer control.

What is the most common problem with washing machine?

10 Most Common Washing Machine Problems

  • It Bounces Around. …
  • It’s Noisy. …
  • Clothes Are Getting Ripped. …
  • Improper Or Slow Draining. …
  • My Washing Machine Won’t Spin. …
  • There’s No Water. …
  • The Door Won’t Open. …
  • It’s Smelly.

How do I troubleshoot my Whirlpool washer?

While troubleshooting a Whirlpool top load washer, check the washer tub’s agitator by turning on the washer, opening the lid and seeing if it moves. Remove a faulty agitator and inspect for damage. Replace damaged components with parts from an agitator repair kit. If the washer has a belt drive, inspect the drive belt.

What are common problems with washing machine?

Common Washing Machine Problems and Solutions

  • Vibrating Washer.
  • Leaky Washer.
  • Noisy Washer.
  • Washer Won’t Run.
  • Washer Won’t Drain.
  • Detergent Won’t Dispense.
  • Smelly Washer.


How many years should a washing machine last?

around 10 years

Washing machines, on average, last around 10 years, according to Consumer Reports. If your washer is reaching the threshold, or it’s been having some problems, here are some signs the end may be near.

What brand washer lasts the longest?

As far as washing machines go, there are few which last as long as Speed Queen washing machines. The top-end machines are rated to last for 25 years or 10,400 loads. Speed Queen also offers between 3-7 year warranties.

How long does Whirlpool washer last?

A washer can last between 12 and 14 years, while a dryer lasts between 18 and 24 years. The washer and dryer should last a long time. The length of time you can keep this appliance depends on how often you use it and how many loads you have.

Which is the most reliable washing machine brand?

Samsung front-load washers rank highest in customer satisfaction, according to J.D. Power’s laundry appliance satisfaction study, and Samsung was named one of the most reliable brands by Yale Appliances and Puls repair technicians, as well. With this washer, you get 10 cycles.

Is Whirlpool a good washer?

Is Whirlpool a good brand for washing machines? Yes, Consumer Reports and other similar consumer groups routinely rank Whirlpool among the most reliable brands for washing machines. The company has learned a lot about the appliances in more than 100 years of operation.

Is Whirlpool a good brand?

Ranking as the number-one most reliable appliance brand in the U.S., Whirlpool is favored for their consistent performance in addition to providing an accessible user experience. The brand is considered a strong finisher across both kitchen and laundry categories.

Are top or front loaders better?

Front load washers are considered superior at cleaning clothes with less water and less wear on your fabrics. Top load washers clean faster and are slightly more ergonomic, so it may come down to the monetary value.

What are the disadvantages of front loading washing machine?

Cons of Front Load Washers



Front load washers can require more maintenance than top load washers. You can’t always put clothes in mid-cycle, as the door locks to prevent leakage. Because it’s harder for water to evaporate, front load washers may have more mold or mildew problems.

Can you wash blankets in a front loader?

Make sure the blanket will fit in the washing machine.



Front-loading washers and top-loaders without agitators will produce optimal results, as the drum is spacious and allows plenty of room for the blanket to move.

Adblock
detector