Home Improvement

Why does washing machine Show 1e?

An IE error code indicates that the washer was unable to fill with water. During cold and freezing weather conditions, an IE error code could mean the water in the water supply lines are frozen.

How do I fix E1 error on my washing machine?

Solution check whether the filter is blocked clean the filter. The specific operations are as follows a push the filter cover gently by hand to make it bounce open and open the filter.

What is 1e in washing machine?

An IE error code in LG washing machines signals that the machine’s washer was not filled with water in the allotted time. This could also be possible due to a faulty water inlet valve or a problem with a drain hose among others.

Why does my washing machine keep saying E1?

When the Washing Machine is displaying E1 in the panel, it is indicating an error in the water supply. The appliance is not detecting that the unit is filling with water.

What causes IE error in LG washing machine?

The IE error code on the LG washers display is indicating water did not fill the tub or it did not fill properly in the allotted time. This can be from a faulty water inlet valve, drain hose issue, bent water hoses, the water valves to the washer are not “open”, or there may be a communication or wiring harness issue.

How do I fix error code 1E?

If both the hot and cold water taps are not fully open, the IE code will appear on the washer’s display. Be sure that both the hot and cold water taps are opened fully, and resume normal operation. If the washer’s inlet hoses are kinked or damaged, water may not flow properly into the washer.

How do I clear the IE code on my LG dishwasher?

LG Dishwasher – IE error

  1. IE error.
  2. Water does not fill the appliance properly.
  3. Turn off the appliance.
  4. Check the following for the IE error:
  5. Check the water supply.
  6. Make sure water pressure is 20 – 80 psi.
  7. Check the water tap or valve.
  8. Make sure the water valve is fully opened.

How do I fix the LE error on my LG washer?

The LE code can indicate that the washer has been overloaded; large loads and bulky items can strain the motor. Remove a few items from the washer to reduce the load size and restart the cycle. If the code appears again, let the washer sit for a half-hour so the motor has time to cool down before you restart the cycle.

How do I force drain my LG washer?

If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.