Home Improvement

What is the capacity of a Kenmore 80 Series washer?

How many cubic feet is a Kenmore Series 80 washer?

According to your model numbers, the washer has 3.2 cu. ft. capacity and the dryer has 6.5 cu. ft.

What size is a Kenmore Series 80 washer?

Dimensions. The washer dimensions are 27 inches wide, 38 inches tall and 31 ½ inches deep. When the door is open the entire depth increases to 50 ½ inches. This is a front-loading washing machine so the door hinges outward.

How do I find the capacity of my Kenmore washer?

To calculate the capacity (volume) of the tub, you multiply the area by the height. For example if your washer has a tub radius of 10 inches and the height is 14 inches, you would use the mathematical equation below. Area is pi x r-squared = 3.1416 x 10-squared = 3.1416 x 100 = 314.16.

How old is a Kenmore 80 Series washer?

The second letter indicates the year the appliance was made. For example, the F in the 80 series washing machine serial number CF4227224 indicates the machine was manufactured in 1996. The L in the serial number CL2636932 for a 70 series washer indicates the machine was made in 2001.

How many cubic feet is a Kenmore 80 series dryer?

1 Answer from this member: This model of dryer has 5.9 cu. ft. of capacity.

How long do Kenmore washers last?

10-13 years

On average, Kenmore washers should last for at least 10-13 years. Most customers have reviewed that the product is pretty good since the company has been recognized as the top appliance brand in America. Therefore, you can rely on their products when it comes to performance and convenience.

Where is the model number on a Kenmore 80 Series washer?

For a top-loading Kenmore washer, try these locations to find your model number: the back of the control panel. the upper-left hand corner of the back. the lower left-hand corner of the front.

How many cubic feet is Kenmore 70 series dryer?

According to your model number, this dryer has 7 cu. ft. of capacity.

How old is my Kenmore?

Locate the serial number on a Kenmore washer made by Whirlpool. The second letter of the serial number identifies the year the machine was manufactured. For instance, “L” represents 2001, “M” means 2002 and, continuing through the alphabet, “Y” means 2009.

How long should a washer last?

10-13 years

How long does a washing machine last? A typical washer should last 10-13 years. Top-loading washers typically last a few years longer than their front-loading brethren.

What do Kenmore model numbers mean?

To figure out the manufacturer, you need only look at the model number. The first three digits followed by a dot (###.) reveal the manufacturer. These are the main code numbers that indicate which major companies made your Kenmore: 110, 106, 562, 665, 198 = Whirlpool.

When was the Kenmore 80 series dryer made?

Thank you for contacting ManageMyLife.com regarding the age of your Kenmore washer and dryer. I’m happy to help you today. The washer was manufactured in March of 1997 and the dryer was manufactured in March of 2004.

How many cubic feet is a Kenmore 70 Series washer?

The Kenmore 70 series washer has a 3.5 cubic foot capacity. It comes with the Sears Triple Action agitator and can hold 28 extra-large t-shirts in a single load. It has a white porcelain wash basket that is durable and easy to keep clean. A 700 max spin cycle leaves clothes prepped for the dryer.

How do I know what series my Kenmore dryer is?

On most Kenmore Elite dryers, the model number sticker is around the opening of the door. Open the dryer door and look around the outside of the door opening. Some dryers have the sticker on the bottom left or right side. Some dryers have the sticker on the top right side.

Why is my Kenmore 70 series dryer not heating?

If your Kenmore dryer isn’t heating, don’t assume the flame sensor is defective. First, check to see if the igniter and thermal fuse are bad. If you’ve ruled out those causes, test the flame sensor for continuity at room temperature with a multimeter. If there’s no continuity present, replace it.

Why does my Kenmore dryer take so long to dry clothes?

Common solutions for: Kenmore Dryer takes too long. If the vent is clogged or partially clogged, it will restrict the airflow through the dryer, substantially increasing the drying time. To ensure proper dryer performance, you should clean your dryer’s venting system at least once per year.

How dO I know if my thermal fuse is blown?

To test if your thermal fuse has blown, touch the right side of your multimeter lead to the right side of the fuse, and repeat with the left multimeter lead. If the multimeter needle fails to move, this indicates the thermal fuse has blown.

Why is my dryer heating up but not drying my clothes?

If your clothes dryer feels really hot, but your clothes take forever to dry, the vent may be clogged. A clogged vent traps the excess hot air inside the dryer’s drum, but the low circulation of air keeps clothes from getting dry. Make sure you’re always cleaning off the lint screen before you run the dryer.

How long should it take to dry a load of towels?

A single bath towel put in the tumble dryer on its own should dry within 10-30 minutes, depending on the model of dryer and the heat settings. A full load of towels is likely to take at least an hour to dry in a tumble dryer.

Why does it take 3 cycles to dry clothes?


So some reason there's an air restriction. So typically those are the ninety ninety five percent of time those are the reason why the dryer gets hot but takes two or three cycles to dry.

Should the air coming out of the dryer vent be hot?

The air coming out of a drying vent ranges from 125-135 degrees Fahrenheit. If the dryer is hot to the touch, this could indicate a fire hazard. There are multiple dryer types and numerous ways to deep clean your dryer. Finally, a dryer vent is supposed to be hot to the touch.

How often should a dryer duct be cleaned?

Every year, dryer duct fires cause $35 million in damages, hundreds of injuries and even deaths. If you ever notice a burning stench in your laundry room, this is another indication you should get cleaning sooner rather than later. Experts recommend you clean out your dryer ducts twice a year.

How often should you get your dryer vent cleaned?

once every 12 months

But even with these preventative steps you should clean your dryer vents at least once every 12 months to remove the lint and debris and prevent clogs! If you don’t want to do it yourself – hire a Dustless Duct professionals to take care of dryer vent cleaning.

How can you tell if your dryer vent is clogged?

How To Tell If Dryer Vent Is Clogged

  1. Excess Dry Times. One of the first signs that your dryer vent is clogged is when your clothes are no longer fully drying during a regular dry cycle. …
  2. Burning Smell. Have you noticed a burnt odor coming from your dryer whenever you have a load going? …
  3. Hot Exterior. …
  4. Sizable Lint.


Can I squeeze dryer vent?

It is simply a hose that can be made of either metal, metal foil or plastic and its specialty is flexibility. It can stretch out or it can be squeezed into place with ease.

Can you clean your dryer vent yourself?

Remove lint from the duct by hand and then vacuum the inside of the duct. Use hose extensions, if available, to vacuum out as much of the duct as you can. Go outside the house and remove the exterior vent cover. Clean out the dryer vent from the outside using a vacuum.

Adblock
detector