Home Improvement

What does uL mean on Whirlpool Cabrio?

unbalanced loadunbalanced load) appears in display, the load is out of balance. The washer is running a load-balance correction routine. Allow the washer to continue. If the dial is flashing and the washer has stopped, redistribute the load, close the lid, and press START/PAUSE.

How do I fix my uL washing machine?

UL is the code for unbalanced load.



  1. Unplug the washer for 1 minute from the electrical outlet.
  2. Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid. …
  3. The motor has now been reset and is ready for you to start a cycle.


How do I reset my Whirlpool Cabrio Top load washer?

Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.

What does uL mean on my washing machine?

Unbalanced load

uL. (none) Unbalanced load. uL is displayed when the machine/motor control detects an off-balance load and remains on while the washer runs a mini-cycle to rebalance the load.

How do I fix the code on my Cabrio washer?

Youtube quote:
So I have diagnosed that it needs a new tub hub the reason being is the tub hub. Actually helps the inner basket engage into the spin. So right now it should be engaged into the spin.

What is UL code?

    HTML Tag



    The

      element is used to define an unordered list of items. Use an unordered list to contain

    • elements that do not need to be presented in numerical order and can be rearranged without changing the meaning of the list.

      Why does my washing machine keeps unbalancing?

      One or more of the suspension springs might be broken. The suspension springs help to absorb the movement of the washer tub. If a suspension spring breaks, the tub might become unbalanced, causing it to shake and vibrate during operation. Inspect the suspension springs to determine if any of the springs are broken.

      Where do I find the error code on a Whirlpool Cabrio washer?

      Youtube quote:
      Hold for three release. For three then press and hold until all the consul's indicator lights come on and eighty-eight is displayed. After three more seconds any stored error codes will be displayed.

      How do you fix a 5d code on a Whirlpool Cabrio washer?

      To solve the problem correctly, you need to press two times on PAUSE / CANCEL or 1 – on POWER, and then start washing. Stop the washer and take out items that are too bulky, soft, or fluffy. After that, continue the started cycle. The 5d error should go away because the sensor was reacting to swollen woolens.

      Why is my Whirlpool washer not draining?

      If your washer’s drain hose is kinked or bent, the washer will not be able to drain properly. The drain hose may also be obstructed by a small article of clothing. Check your drain hose and remove any obstructions, and straighten it if it’s bent. Make sure the hose is placed less than eight feet above the floor.

      How do you manually drain a Whirlpool Cabrio?

      Find the “Pause/Cancel” button on the control panel. Press this button twice to drain the washer. Press the “Power” button and rotate the cycle selection knob to “Drain and Spin” to remove the remaining water from the load.

      How do I clean the filter on my Whirlpool Cabrio washer?

      Youtube quote:
      First disconnect the hoses from the back of the washer. Use a small brush to clean the filters connect the hoses to the washer.

      Why is my Whirlpool Cabrio washer not draining?

      Check the impeller inside the pump to make sure it doesn’t wobble. If your washer still doesn’t drain, remove the hose that runs from the pump to the drain. Make sure this hose is free from debris and blockages. If your pump is getting power, and no clogs are found it’s best to replace the drain pump motor.

      What is the life expectancy of a Whirlpool Cabrio washer?

      Whirlpool also says the lifespan of a Cabrio washer is 11 1/2 years, that’s comical, if you’re easily entertained by bad jokes.

      How do I force my washing machine to drain?

      How to drain a washer filled with water

      1. Try the spin cycle. …
      2. Turn off the power and water supply. …
      3. Remove and check the drain hose. …
      4. Check to see if it will drain with the help of gravity. …
      5. Check your machine’s inner workings. …
      6. Check the drain pipe. …
      7. Drain manually if needed. …
      8. Call a service professional.


Adblock
detector