Home Improvement

How tall are built in refrigerators?

The typical built-in refrigerator towers over 80 inches and can be up to 48 inches wide, and will take a massive bite out of your budget—sometimes $10,000 or more. Until recently, homeowners with limited space and a tight budget were out of luck if they wanted a true built-in refrigerator.

How tall is a built in fridge?

The Dimensions

As we mentioned earlier, standard built in refrigerators measure 84 inches tall, although you can find some that are 72 or 80 inches tall. The trickier decision for you is the width, which can measure from 18 to 48 inches, with lots of options in between.

Are all built in refrigerators the same height?

How tall are refrigerators? Standard refrigerator height ranges from 66 to 70 inches tall, with French Door and side-by-side models measuring on the taller ends. Counter-depth refrigerators will also likely measure a few inches taller than standard refrigerators.

Are built in fridges standard size?

Integrated fridge freezers normally come in a standard width of around 55cm. However, we do stock some wider models that go up to around 60cm to make sure we cater for all cabinet sizes.

What is the tallest fridge height?

Standard Refrigerators

Heights run within a range with the shortest fridges being around 60″ tall and the tallest being in the 80″ range.

What is the difference between a built in refrigerator and counter-depth?

Built-In Refrigerators are at counter depth including the doors and will not stick out into the walkway of your kitchen. These types of refrigerators have the option to blend in with the rest of the cabinetry by installing cabinet panels on the front.

How tall is a Frigidaire fridge?


Actual Width (Inches) 29.875″
Depth (Including Handles) (Inches) 32.625″
Height to Top of Door (Inches) 65.375″
Refrigerator Capacity (Cu. Feet) 14.1 ft³
Freezer Capacity (Cu. Feet) 3.9 ft³

Why are tall refrigerators so expensive?

The answer is very simple, because they can be. Built in refrigerators cater to a small luxury market that has the money to pay a premium price tag. And that’s about it. Seriously, it’s a limited high end market selling a product that’s not mass produced.

How is refrigerator height measured?

Go from the floor to the lowest point on the upper cabinets. Finally you'll measure the depth of the space. Go from the back wall to the front edge of your counters or adjacent wall.

DO built in refrigerators last longer?

In fact, built-in refrigerators are available up to 48 inches wide. They’re also usually taller than stand-alone refrigerators so that there’s not a gap between the top of the refrigerator and the cabinets. Built-in refrigerators are built to last. They have a longer lifespan than most stand-alone refrigerators.

How tall is a LG fridge?

This refrigerator fits to 66” height and 33” width. It is one of the biggest refrigerators with similar dimensions. The LG SpacePlus® Ice System is on the inside door, freeing up valuable space in the fresh food shelf compartments. More space means you can store more food.

How tall is a Whirlpool fridge?

With a height of 72 inches, this tall Whirlpool® Counter-Depth Refrigerator fits the bill for spaces that can handle the extra height.

How tall is a Samsung fridge?

Samsung Refrigerators: 70 – 70 7/8 Inches Tall – Sears.

What is the height of Samsung double door fridge?

Samsung RT28K3343R2 253 Ltr Double Door Refrigerator Specifications

depth 688 mm
width 555 mm
height 1545 mm

Can you adjust height of refrigerator?

It will actually increase the height so that's a rule of thumb flipping to the right decrease flipping to the left. Increase. So and then you can lower it when you're.

What are the dimensions of a refrigerator?

Standard Refrigerator Dimensions. The standard refrigerator dimensions are about 29 to 36 inches wide, 67-70 inches high, and 29-35 inches deep. You should also check the interior dimensions which should provide you with space of about 14-20 cubic feet to store your food.

How tall is a Whirlpool fridge in feet?

The Whirlpool French Door Refrigerator (25 Cu Ft) has an overall height of 70.125” (178.1 cm), width of 35.625” (90.5 cm), and depth of 34.625” (87.9 cm). When open, the depth of the Whirlpool French Door Refrigerator (25 Cu Ft) is 50.5” (128.3 cm). The Whirlpool French Door Refrigerator (25 cu. ft.)

How tall is a Kenmore fridge?


Height to Top of Hinge (in.) 69
Depth w/ Door Open 90 Degrees 61.38
Width 29 to 29 7/8 inches
Depth without Door (in.) 28.5

How much clearance does a refrigerator need?

Refrigerators need to breathe. If they are entirely boxed in, then there’s not much room for ventilation. When you measure the space for the refrigerator, and compare it to the size of the refrigerator, leave at least 1 inch of extra room for the back and the top of the refrigerator.

How far should a fridge stick out past the counter?

Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.

How much space should be between refrigerator and wall?

The refrigerator should be at least two inches from the wall. Top — If you have back coils, you will need at least two inches of top clearance to dissipate heat, but for bottom coils, as little as one inch can be sufficient. Sides — Regardless of coil placement, the sides require the least amount of space.

How much space do you need for a 36 inch refrigerator?

1-9 of 9 Answers. The unit is 35 and 3/4 inches wide. If you’re installing next to a wall, you’ll need a minimum clearance of 3 and 3/4 inches for the door.

How do you cut cabinets to fit a fridge?

Use a straightedge to draw a line around the perimeter where the cabinet needs to be cut off. Use a circular saw to cut the cabinet one side at a time to shorten it. After you’ve cut through the cabinet, trim the bottom so it fits back on. Screw it back on from the bottom.

How much space do you need for a 33 inch refrigerator?

Yes 34 inches is enough room. In general you want 1/8 to 1/4 inch on each side.

Can a French door refrigerator go next to a wall?

A basic guide is to allow for 2 inches in the back, 1 inch at the top between the upper cabinets and the refrigerator and a minimum of 1/8 of an inch on either side of the fridge.

How much clearance does a French door fridge need?

Standard-depth refrigerators typically measure 30 to 35 inches in depth, as opposed to counter-depth refrigerators that sit flush with cabinetry. 3 Allow 3.75″ of clearance when installing along a wall. This will allow for the door to open 90 degrees without the handle contacting the wall.

What refrigerators have zero clearance doors?

Built-In Refrigerators

Built-in models have no gaps on the sides, as they have special hinges that allow the doors to open without swinging wider. Zero-clearance models include Sub Zero, Liebherr, Bosch, BlueStar, Fisher and Paykel, and Haier, among many others.