Home Improvement

How much is Hardie board installed?

Average cost: $1,500 – $9,000 Hardie board siding costs anywhere from $1 to $6 per square foot of material installed on a home. If you were to replace siding on an average size home of 1,500 square feet, you could expect to pay anywhere from $1,500 to $9,000 in total installation and replacement costs.

How much is Hardie board a square?

You should expect to pay somewhere between $7 to $13 per square foot of Hardie board siding. Keep in mind that this includes installation as well as the material. This price is a bit higher than most other siding materials, but it isn’t the priciest solution.

How many years does hardiplank last?

The Hardieplank lifespan.



As a result, it has the same durability as brick or stone. And just as with a brick or stone home, Hardieplank siding should last for the life of your home. James Hardie offers a 30-year warranty on their product, which shows just how confident they are in the long life of their product.

How do you calculate Hardie siding?

To find the area of a triangle, multiply the height of the triangle by the length of the longest side, then divide by two. Once you know the area for each section, add all of the areas together to determine the total square footage of your home’s exterior.

Is Hardie board more expensive than vinyl siding?

For starters, Hardie board is more expensive than vinyl. The actual cost of the material depends on its quality, but it’s important to remember that the more you spend, the better you can expect your new siding to withstand the elements. Hardie board also requires more labor for installation.

Why is Hardie board so expensive?

High Installation and Labor Costs: Hardie board siding requires more planning, a larger labor force, and takes longer to install due to its composition. It weighs about 300 pounds (100 square feet) compared to 60-70 pounds for vinyl siding. This can increase labor and the cost of cement installation.

What is the labor cost to install Hardie siding?

Hardie Board siding materials cost $3 to $6 per square foot, and the labor cost to install is $3 to $7 per square foot. Old siding removal adds $0.25 to $1 per square foot when residing. Get free estimates from siding contractors near you or view our cost calculator below.

Is Hardie board expensive?

Hardie board siding costs anywhere from $1 to $6 per square foot of material installed on a home. If you were to replace siding on an average size home of 1,500 square feet, you could expect to pay anywhere from $1,500 to $9,000 in total installation and replacement costs.

Is hardiplank and Hardie board the same?

Fiber cement siding is often called “hardiplank” or even “hardie board” named from the most popular brand of fiber cement siding which is manufactured by James Hardie. Fiber cement planks are formed by combining wood pulp with Portland cement.

Do you paint Hardie board?

Yes, you can, and you should. Painting Hardie board siding will significantly improve its look and its longevity. Siding finishes generally last for around 15 years, so you need to do it, and do it right. Painting, when done properly can really bring out the wood feel of the Hardie board.

How often does HardiPlank need to be painted?

every ten to twenty years

Hardie Plank is also called fiber cement siding. While it’s far heavier than aluminum, vinyl or wood, it is extremely durable and typically only needs a new paint every ten to twenty years for maintenance. It is one of the best materials and long-term solutions for protecting your home.

Does Hardie board add value?

James Hardie siding looks great and is long-lasting, which offers homeowners an excellent return on investment. According to the 2020 Cost vs. Value report, Indianapolis homeowners who invest in fiber cement siding recoup 80.5% of their investment.

What is better than hardiplank?

Once the contractors believed in the product, the information was passed to the homeowners, including the following advantages: LP SmartSide has superior moisture protection and strength, longer lengths than Hardie (16′ over 12′), less weight than Hardie, and is less expensive to install (no special cutting tools …

Do termites eat hardiplank?

Hardie Board siding resists pests including termites and carpenter ants. It’s also woodpecker resistant, so you don’t have to worry about the hassles of repairing termite or woodpecker damage.

What is cheaper than Hardie?

Across the US, LP Smart siding costs 25-35% less than James Hardie. This difference amounts to thousands of dollars! LP is cheaper because both the materials and labor cost less than Hardie siding.

Do you need insulation under Hardie siding?

James Hardie siding and trim products can be installed over solid-foam insulation board up to 1-in. thick. Caution should be taken as irregularities and unevenness in framing, sheathing, foam and other wall assembly components, including under driven nails, can telegraph through to the finished siding and trim.

Do you need strapping for Hardie board?

Best Practice. Even though James Hardie does not require a rainscreen in most cases, it can still be a relatively inexpensive way to improve the long-term health and performance of your structure. Particularly with HardiePanel, we always recommend at least a drainable housewrap as a weather barrier.

Does Hardie siding Add R-value?

Most siding R-values are less than 1. Standard vinyl siding has an R-value of 0.61, and Hardie siding’s R-value is 0.37. While vinyl siding is more energy-efficient, neither makes a significant difference in how much energy your home will save.

How do you side your house with Hardie planks?

Run the siding to the hardy trim board leaving a 1/8 inch gap between the siding and trim. The bottom of the sightings should be kept even with the bottom of the trim.

Can you nail through Hardie board?

For Hardie siding, it’s recommended to use stainless steel or hot-dipped galvanized nails. You can either nail by hand or use a pneumatic nailer. However, it’s best to use a pneumatic nailer for speed and consistency. At the bottom, the siding should be face nailed, and at the top, it should be blind nailed.

Do you nail or screw Hardie board?

James Hardie prefers and recommends installation of HardiePlank® lap siding by the blind nailing technique, such that fasteners are hidden by the course above. Fasteners shall be installed between 1 in. and 3/4 in. from the top edge and no closer than 3/8 in.

Do you caulk Hardie board joints?

James Hardie DOES NOT recommend using caulk or “H”-jointers for the butt joints of HardiePlank® siding with ColorPlus® technology. James Hardie also DOES NOT recommend applying caulk to the horizontal overlap between siding planks (see Figure 2).

Can you pressure wash hardiplank?

The manufacturer recommends that you do not pressure wash your Hardie siding. The hard spray of water from the power washer can damage the surface of the siding.

Is hardiplank cheaper than brick?

Brick runs approximately $4/SF for the installation labor. It takes more labor and more time to install brick veneer siding than it does hardi plank, thus making the brick significantly more expensive when comparing on a square footage basis.

Is Hardie siding waterproof?

The HardiePlank siding is made with a human-made mix of strong materials and wood fiber for years of worry-free, maintenance-free service. Fiber cement siding is waterproof, fire-resistant, and insectproof.

Is Hardie siding worth?

James Hardie siding is a great, environmentally friendly choice for overall curb appeal and home value. It will give your home a new look and feel to it. It is an attractive choice with guaranteed durability and quality. It provides an amazing return on investment.

Does hail damage Hardie board?

Durability. Hardie Board siding is most well-known for its durable material, fiber cement, that makes it capable of standing up against wind-blown projectiles or hail. It’s resistance to almost any weather condition makes it ideal for homeowners in any climate.

Adblock
detector