Home Improvement

How do you wrap Christmas lights on an outdoor tree?

What is the easiest way to wrap Christmas lights?

So I start with the female end. And I start wrapping it around my hand. And then I just wrap it into a ball. And so usually I'll hire my kids to sit there in the living room.

How do you string lights on a large outdoor tree?

For especially tall trees, grab a ladder and a friend to help. Wrap the light string into a ball and begin unraveling as you move up the trunk. Be sure the prongs that you need to plug in are on the bottom. Plug another string of lights into the first, secure both with electrical tape and start wrapping the branches.

How do you drape lights on trees?

Starting at the top of the tree, intertwine the lights on top of and under branches. Work your way down and around the tree, hanging lights in the back as well. When you reach the bottom, hide any extra lights behind the tree.

How do you put lights on an outdoor tree?

It's important to make sure you're wrapping them the right way the male connector needs to be at the bottom of the tree. So that you can connect it to the female connector on the power.

How do you wrap Christmas lights without a tangle?

Roll out a length of plastic sheet equal to that of the strand lights and cut the plastic sheet from the roll. Place the strand on top of the plastic sheet and roll the plastic sheet and strand lights together. This will keep the icicle strands from tangling and bundle everything neatly inside a sheet of plastic.

How do you decorate an outdoor Christmas tree?

10 ways to decorate outdoor trees for Christmas with lights

  1. Go for the classic wraparound design. …
  2. Create a stunning display with a cascade of string lights. …
  3. Enhance an outdoor Christmas tree with deep blue lights. …
  4. Mix and match cool and warm lights. …
  5. Create a pastel marvel with white-cable lights.

How do you put lights on a big pine tree?

It there with a good old trusty duct tape. And this gives me a hook. That I can hook the Christmas lights on so the technique that you have to use and the gel show here shortly is you have to loop

How do you string lights on a maple tree?

6 EASY STEPS TO WRAP LIGHTS ON AN OUTDOOR TREE:

  1. Determine the tree(s) you want to have lights. …
  2. Determine how many lights you will need. …
  3. Start wrapping from the bottom of the tree. …
  4. Go around the Circumference of the tree trunk / branches systematically, wrapping tightly. …
  5. Check your lights.

How many feet of light do you need to wrap an outdoor tree?

Use this equation to learn how to wrap a tree with lights: 4’H trunk / 3″ spacing = 16 x 2′ circumference = 32′ of lighting. 3’L branch / 3″ spacing = 12 x 6″ circumference = 6′ of lighting per branch. Total lighted feet will be approximately 56′ for the trunk and four branches.

How do you put lights on an outdoor evergreen tree?

Hanging Lights on Your Outside Tree

  1. Set up your ladder. Always make sure you can climb down easily.
  2. Mark your tree. …
  3. Attach your power source. …
  4. Start wrapping the light strand. …
  5. Plan spacing for branches. …
  6. Secure the end of your light strand with a simple knot or twist tie.
  7. Plug your lights in and admire!


How do you hang Christmas lights outside?

How to Hang Lights Outdoors

  1. Test the lights. …
  2. Plug the first strand into an extension cord to double-check that your lights can reach a power source.
  3. Attach lights to clips and start hanging.
  4. Slide rooftop lights in place, inserting the clips in the gutter or between the roof and shingles.

How do you hang Christmas lights outside without nails?

To hang Christmas lights with adhesive hooks:

  1. Smooth exteriors, like aluminum siding, will accept adhesive hooks. …
  2. Buy enough adhesive hooks to secure light strings every 6 to 8 inches.
  3. Remove the backing on each hook and stick it into place.
  4. Hang your Christmas lights once the hooks are installed.


How do you hang lights outside?

Pull the string lights taut as you go to attach string lights to the stucco or wood of your home drill a hole then hammer in a wall anchor before screwing in a hook to hang the lights.

Should you cover outdoor Christmas light plugs?

Make sure all outdoor cords are not in excessively wet or damp locations to reduce risk and other hazards. Also, make sure that all your outdoor receptacles are covered with plastic bubble covers. This keeps the extension cord protected from the outside elements while plugged in.

How do you protect outdoor Christmas lights from rain?

As for how to protect outdoor Christmas lights from rain – put them on stakes or other elevated positions above ground as well. You can hang them on trees, bushes, on your fence, or on your yard furniture but make sure they are not just lying on the ground.

Are outdoor Christmas lights safe in the rain?

“Make sure where everything plugs in is dry and not exposed to the elements because the electricity still goes through the equipment and the light portion, what goes outside is what’s important.” He said Christmas lights are meant to be used outside, they will be fine in rainy conditions.

How do you protect outdoor plugs from rain?

Here are a few tips to keep your outlets safe and dry.

  1. Use a GFCI Outdoor Outlet. …
  2. Make Sure Outlets Are Properly Installed. …
  3. Install a Weatherproof Cover. …
  4. Take Safety Precautions. …
  5. Don’t Let a Rainstorm Cause You Electrical Problems at Home!


How do you cover outdoor plugs?

As earlier indicated, the simplest way to protect outdoor plugs from rain is to use a plastic box with an opening on the bottom. Most outdoor outlets designed for homes usually come with spring covers or flippies. While closed, these covers are completely weatherproof.

Should outdoor plugs be covered?

Since outdoor outlets are exposed to the elements, such as rain and salty air, outlet covers protect them from damage. Any outlet that’s outside should have a cover, even if the outlet is never used.

Can you leave outdoor extension cords in the rain?

An extension cord can survive the rain if it is rated for outdoor use and if it is in good condition. However, the plug should be kept out of the rain.

How do you waterproof outdoor extension cords?

You're. Gonna have a few a green lawn or yellow one blue one next to an orange one and when you push them in as hard as you can you're usually gonna get this eighth inch or 16th inch gap.

How do you hide an extension cord outside?

Running a Cord or Lights Along the Eaves



Use the pre-drilled hole to attach the plastic wedge to the soffit of your house. This clamps the cord in place using the pressure of the screw. Space the hard plastic shims as needed to hold up the cord.

Can extension cords get wet Christmas lights?

Yes, you should. The plugs and sockets are usually sealed by air and plastic. They are not waterproof.

How do you waterproof outdoor lights?

They have this little device you can pick up at your local hardware store it's called twist and seal and you just put your electrical connection right into it and you snap it closed.

Are orange extension cords waterproof?

Clear Power 50 ft Outdoor Extension Cord 16/3 SJTW, 3-Prong Grounded Plug, Orange, Water & Weather Resistant, Flame Retardant, General Purpose Power Cord for Lawn & Garden, DCOC-0117-DC.

Adblock
detector