Home Improvement

How do you use Scotts Turf Builder Edgeguard mini?

How do you use Scotts Turf Builder mini spreader?

Fill hopper with Scotts® lawn fertilizer or grass seed. Turn orange rate dial to the desired “Broadcast/Rotary Spreader” setting listed on the back of each Scotts® product. To apply product begin walking, then squeeze and hold trigger. NOTE: Each pass should be within 1.5 metres (5 ft.)

What setting should I set the Edgeguard Mini for fertilizer?

When applying grass seed for a new lawn, or repairing bare spots, set the orange dial to 13. For overseeding applications, set the dial to 7 1/2. Using your Edgeguard Mini broadcast spreader correctly will ensure accurate, even coverage and reduce wasting costly seed.

What do the numbers on a Scotts mini spreader mean?

For fertilizer spreaders the numbers usually represent the amount of fertilizer that is to be applied over a specific square feet of land. On spreaders you can find numbers such as 5, 5 and a half or 18 and a half.

What setting should I use on my Scotts spreader?

Scotts Turf Builder Spreader Settings



Set the dial on the spreader at the recommended setting indicated on the grass seed or fertilizer bag, turning clockwise for larger granules or counterclockwise for smaller. Close the hopper and then add the product.

What should I set my grass seed spreader to?

Agway recommends a setting of 15 for overseeding and 18 for a new lawn when using either their rotary spreader or an Earthway rotary spreader. With an Agway drop spreader, use a setting of 18 for overseeding and 22 for new seeding.

What is Edge guard on Scotts spreader?

EdgeGuard blocks off the right side of the spreader pattern to prevent product from spreading onto non-lawns areas.

How are spreader settings calculated?

Calibrating Your Spreader

  1. Divide 100 by the square foot the bag of fertilizer covers.
  2. Multiply the weight of the bag by this number.
  3. The answer is the amount of fertilizer needed to cover 100 sq. ft.
  4. Place this amount in the spreader.
  5. Mark off a 10 ft. x 10 ft. area.
  6. Apply using the suggested setting.


What do spreader settings mean?

A spreader setting is the rate in which you apply product to your lawn. Each Jonathan Green product has recommended rates of application and coverage based on bag size. The application rate is defined as the amount of material applied per unit area of land.

How do you calibrate a Scotts broadcast spreader?


Begin your test run across the area that you marked off earlier. Be sure to give yourself enough space to get up to speed before you reach the starting line. Once you hit that line open up the hopper.

How do you apply fertilizer to a lawn spreader?

When using the two-wheel fertilizer spreader there are other types of water-soluble liquid fertilizers but because they are liquid based fertilizer. The application dissolves quickly into the soil.

Do you need a spreader for fertilizer?

Do You Need a Spreader? If you’re going to spread fertilizer on your lawn then you really shouldn’t do it without a spreader. There are two types of spreaders: broadcast and drop. Drop spreaders are for more targeted applications, while broadcast spreaders are good for covering a large area quickly.

Should I fertilize my lawn before it rains?

Using Fertilizer Before Rain



It’s fine to spread your fertilizer before it rains as long as it’s more mild or light conditions. Of course, water is important for plant growth and is similarly important to helping the fertilizer’s nutrients break down and get absorbed through the roots.

What is the best way to spread fertilizer?

Application across the yard is to set the spreaders setting down very low pour. The amount of fertilizer that we need in our yard in this case we would need two bags pour that into our spreader.

Is it OK to fertilize after rain?

It is best to wait a day or so after a rain before applying fertilizer. At this time, any pools of water will be gone, but the ground will still have moisture in it. Do not apply fertilizer on grass blades that are still wet. Check the forecast and make sure some sunshine is in order.

Should I fertilize in the morning or evening?

The best time to use pesticides or fertilizer is in the evening or early morning until 8 am. Both the time are perfect because the sun is not working during this time frame. It’s the same phenomenon as above. The plants absorb the applied liquid fertilizer or pesticide best in the early morning.

Should I mow before fertilizing?

Ideally, you’ll want to mow and rake before fertilizing, so that excess lawn waste is removed and the fertilizer will have an easier time reaching the soil. Aerating your soil before fertilizing can also help; the best times to aerate are when your grass is actively growing, such as in spring or early fall.

What time of day should I fertilize my lawn?

Fertilizing your lawn in the morning enables you to take advantage of cooler temperatures and morning dew to reduce the risk of burning the grass. As you spread the fertilizer and water it in, the nutrients will have the best chance of reaching the roots and being absorbed quickly.

How many minutes should I water my lawn after fertilizing?

How Long Should You Water Your Lawn After Fertilizing? The fertilizer and soil should be thoroughly moist, but don’t water so much that the water begins to form puddles. About 20 minutes should do the trick.

Should I water after applying Scotts Turf Builder?

Scotts Turf Builder for New Lawns should be lightly watered in immediately after application. Apply Turf Builder Food for New Grass Plus Weed Preventer before watering a new lawn the first time.

What happens if you don’t water after fertilizing?

Fertilizer Runoff



If you leave fertilizer sitting on your lawn without watering it into the soil for a period of days, you run the risk of losing some or all of your fertilizer to the first heavy rain that hits your lawn. In addition to wasting your time and money, this runoff can pollute nearby waterways.

How often should grass be fertilized?

For most lawns, applying fertilizer once or twice a year is enough to keep your grass green and healthy. Precisely when you apply fertilizer depends partly on your climate, but mostly on the type of grass you have. The key is to fertilize during the season when your grass is doing the most growing.

How long should you stay off grass after fertilizing?

about 24-72 hours

It’s generally recommended to wait about 24-72 hours after a fertilizer application before letting your kids go back onto the grass and to also ensure your lawn is watered well before the kids go back to playing in the grass.

Can you apply Scotts Turf Builder on wet grass?

2) Fill and Set Spreader: Applying Scotts® Turf Builder® Weed & Feed requires a lawn spreader. If you need a new spreader, you can find one here. Refer to the Spreader Settings section above to set your spreader properly. 3) Apply to Wet Lawn: Make sure the grass is wet from dew or sprinkling before applying.

Should I water before fertilizing?

As a general rule, it’s good to thoroughly water your lawn before and after applying fertilizer while allowing time for it to absorb into the soil. You should apply fertilizer to your lawn during its growing cycle when it needs nutrients the most.

Should I water after fertilizing?

At Master Lawn, we typically say to wait 24 hours before watering your lawn after fertilizing. But it is important to make sure that it does receive a good watering session soon after that 24 hour waiting period. Watering helps the fertilizer to activate and to break down and begin feeding nutrients to the lawn.

Adblock
detector