Home Improvement

How do you use a rigid pipe snake?

How do you use a Ridgid toilet snake?


Down into the toilet. You can pull it back and forth to work the area a couple of times and now we'll give it a flush this washes off the cable. And helps move blockage down the drain.

How do you use a pipe snake?

Steps for using a drain auger

  1. Push the end of the snake into the drain opening and turn the handle on the drum that contains the coiled-up snake. …
  2. Keep pushing more of the snake into the drain until you feel resistance. …
  3. Rotate the snake against the blockage until you feel it feed freely into the pipe.

Which way do you turn a plumbing snake?

As you push the snake into the drain, rotate the handle clockwise. You may need to use both hands on the handle if you are having trouble pushing. To feel for the clog, it is a good idea to move your hands lower on the cable, about three inches above the opening of the drain.

How do you use a Ridgid sewer?

Number one apply sharp downward thrusts on the cable. Both width and without the cable rotating. Method number two change the orientation of the cutter.

How do you use a Ridgid 6 foot toilet auger?

I've sent three feet of cable into the toilet now we're down to the bottom of the toilet. To extend the cable even more there's a button here on the side of the auger. When I press that button.

Is an auger the same as a snake?

The biggest difference between drain snakes and augers is how they remove the clogs. While an auger attempts to force its way through and demolish the obstruction, a snake is designed to pull it out the way it came.

Can a drain snake break a pipe?

Drain Snakes Can Damage Pipes



While billed as devices that are easy to use by anyone and everyone, drain snakes can be hard to manage, and if used improperly, can damage pipes. Old pipes in many homes are galvanized, or coated in zinc, which was done to prevent the pipe from rusting or corroding.

How do you unclog a drain if a snake doesn’t work?

When a drain clogs completely, don`t use a chemical drain cleaner–if it doesn`t work, caustics trapped in the pipes can be dangerous. In most cases, a rubber plunger can effectively remove the clog. Use a plunger with a head or cap big enough to cover the blocked drain opening completely.

How do you unclog a drain with a snake?

How to Make a Snake for Unclogging a Shower Drain

  1. Unwind a Coat Hanger. Disassemble the coat hanger by unwinding the looped end of the wire from the hook part of the hanger, advises Modern Era Plumbing & Gas Solutions. …
  2. Create a Nub. …
  3. Press Sticky Tape Onto the Nub. …
  4. Place the Snake in the Drain. …
  5. Run Hot Water. …
  6. Clean the Shower.


How do you get a drain snake past a trap?

Locate the clog through the cleanout plug. Push the corkscrew auger through the clog until it no longer moves forward, then crank backward about 1/4 turn and push again. Repeat this process until you can feel that you are passing through the clog, then keep pushing until the end of the auger comes out of the drain.

How do you get a snake past the P trap?

The proper way to use a snake is to insert the head into the drain and push very slowly without cranking. If you try to force it, it can bend back on itself and actually come out of the drain. Push gently and slowly, and if the auger is the right one for the job, it should slide smoothly through the pipe.

How do you snake a PVC pipe?

To snake the drain, insert the snake and spin it as you push it down the drain until it reaches the clog. Continue rotating the snake to loosen and remove the clog.

Can a drain snake break a PVC pipe?

If the bottom of the pipe or fittings are missing this can cause the snake to catch and break the pipe. It can also cause the equipment to get stuck. Broken PVC pipe is another issue with drains.

Can I use a drain snake on PVC pipe?

PVC pipes are an improvement over cast-iron pipes, because they have smooth walls that don’t allow debris to cling, so if you have to clear a clogged drain deep in the pipe, you can usually do it with a plunger or drain snake.

Can auger damage PVC pipes?

If you have a clogged pipe, a drain snake is a simple and cheap tool you can use to fix it. These are advertised as devices that anyone can use to unclog a drain. But if used improperly, drain augers could make the clog worse. You could jam the obstruction in there tighter, or worse, do damage to your pipes.

How far should a drain be from a snake?

To do this, put approximately 3′ of the snake down the drain until you feel a resistance. At this point, the snake should either push through or grab the clog.

How big of a drain snake do I need?

Major types of sewer cables & drain snakes

DRAIN TYPE PIPE SIZE RECOMMENDED CABLE SIZE
BATHTUB 1-1/2″ — 2″ 1/4″ OR 5/16″
SHOWERS 2″ — 3″ 5/16″, 3/8″ OR 13/32″
FLOOR DRAIN 3″ OR MORE 3/8″, 13/32″, 1/2″, 5/8″, 3/4″ OR 0.55″
FLOOR DRAIN 4″ — 5″ 1/2″, 5/8″, 3/4″, 0.55″ OR 0.66″

How long of a drain snake do I need?

Because they are designed for the toughest of clogs, the cable should be no smaller than 5/8 inch in size, with a minimum length of 75 to 100 feet in length.

Can a drain snake get stuck?

If your plumbing snake (also known as a drain auger) gets stuck while you attempt to wrestle a blockage out of your drainpipe, you’ve obviously got a persistent obstruction on your hands. A stuck snake can be frustrating, but there are a number of ways to dislodge it.

What can I use instead of a drain snake?

A drain snake (also called a plumber’s snake or auger) is a drain cleaning tool that plumbers have used for generations. If you don’t have a drain snake at your home, you can use a pipe cleaner, a straightened clothes hanger, or make this simple tool out of a plastic bottle: Start with an empty 2-liter plastic bottle.

Will Coke unclog drains?

Coke. Coke is a lesser-known fix you can find in your refrigerator. Pour a 2-liter bottle of cola — Pepsi, Coke, or generic brand substitutes — down the clogged drain. Coke is actually quite caustic and effective at clearing away buildup in your drains, but it’s far milder than commercial drain cleaners.

How do I turn my plumbing snake into a corner?

How to Get Past Corners With Drain Augers

  1. Place the cable of the drain auger at the beginning of the drain opening.
  2. Turn the handle for the drain auger clockwise to start the cable through the drain.
  3. Pull the cable back a little when you reach a corner by turning the handle counterclockwise.
Adblock
detector