Home Improvement

How do you reset a GE light switch?

1 Reset Smart Switch Press and hold your switch’s button, toggle, or paddle for 10 seconds. If the reset is successful, the indicator light will begin blinking blue meaning the switch is ready to be set up again.

How do you reset a light switch?


Let's reset your connected wall switch press. And hold the reset button 10 seconds until you hear the click.

How do you program a GE Z wave switch?

Youtube quote:
Up here at the top of the screen are the three dots press that select z-wave utilities now select z-wave exclusion. And it's in the exclusion. Scenario press the UP button on the switch.

How do you reset GE lights?

1 Reset Smart Bulb

  1. Launch the C by GE app on your phone or tablet.
  2. Tap Settings at the bottom.
  3. Tap Support.
  4. Tap Factory Reset.
  5. Then tap C by GE Lights.
  6. The C by GE app will show you the number of times you have to turn on and off the smart bulb and the amount of seconds you have to keep the smart bulb turned on or off.


How do I factory reset my GE smart plug C?

Factory Reset C-Reach Smart Bridge



Unplug your C-Reach from the wall outlet. While holding the side button, plug it back into the wall and continue holding the button for at least 10 seconds. All 3 LEDs will start flashing once the C-Reach has been successfully reset.

Why won’t my light switch turn off the lights?

The most likely error is that the wire going to the light that stays on is contacting one of the live wires. … Other wires connected to it are probably supplying power to outlets and the light fixture wire may be mixed in. To check, touch each wire in turn to the circuit wire, wearing rubber gloves for safety.

How do you reset a GE Z-wave light switch?

1 Reset Smart Switch



Press and hold your switch’s button, toggle, or paddle for 10 seconds. If the reset is successful, the indicator light will begin blinking blue meaning the switch is ready to be set up again.

How do I reset my Z-wave light switch?

(Ask hub manufacture for more information on this.) For all our Z-wave plus in-wall switches you will click the upper switch 3 times rapidly, and the lower switch 3 times rapidly. On our paddle switches the blue LED will flash 5 times to confirm the reset (there is no LED on the toggle switches to confirm the reset).

Adblock
detector