Home Improvement

How do you install a Platon membrane?

Begin Installation Platon can be sawn to height while rolled up. Standing the roll on the footing when unrolling Platon is easiest. Excess membrane (if any) may be folded out and cut even with the footing edge. Crease the Platon sharply at the footing/wall corner and lay flat on the footing to prevent pull-down.

What is a Platon membrane?

Platon is a rugged, dimpled High Density Polyethylene (HDPE) membrane that keeps wet soil away from the foundation wall. Any moisture that may find its way past the membrane is carried to the foundation drain by the air gap drainage path.

How do you install a dimple pad?

Beginning four to six inches below the orange stripe. The sheet should fit tightly and be evenly installed over the entire wall. Now you can apply a bead of delta sealant behind the flat tap.

How do you install waterproof membrane Foundation?

Press the resistive ace membrane to the side of the foundation from the bottom up use your hands at first then the roller with firm pressure pay special attention to the join of the wall.

What is Dimple mat?

What is a dimple mat? A dimple mat is a sheet of semi-rigid plastic (usually high-density polyethylene) that comes in a roll. The plastic has an egg-carton shape, with protruding dimples that make the membrane fairly thick — generally between 1/4 inch and 1/2 inch thick.

What is form a drain?

FORM-A-DRAIN® is the 3-in-1 foundation solution that forms footings, provides an integrated drainage system, and can be easily adapted to vent radon where needed. Designed for residential basement applications, Form-A-Drain consists of lineal sections installed as the foundation footing forms.

Which way does dimple board go on?

This is a simplified view: Foundation wall The raised dimples go against the wall. The flat tab goes at the top, 1 inch below the grade line. Install concrete nails and approved washers.

How do you put a membrane on a wall?

I'm going to take the trowel. Turn it around. And use the notch. Side. And put the groove okay now we're ready for the membrane. Now what i did is i pre-cut this to fit the wall.

How does dimpled membrane work?

So over time moisture is drawn from inside your home through the wall and condensates on the backside of the membrane. And from there up falls down into the perimeter drain for removal.

What is the purpose of dimple board?

An Effective Method of Controlling Water

The DRY-UP™ Dimple Board is a very tough and long lasting plastic membrane that prevents moisture from passing through. It is also “dimpled” to allow a wall to breathe, allowing moisture to condensate outward so it falls by gravity to a drainage system.

What is the best subfloor for a basement?

Rigid foam is an excellent basement subfloor option because it provides a thermal break between concrete and flooring.

  • Finish flooring.
  • Plywood screwed down through the layer below.
  • Rigid foam insulation—1 1/2-inch thick.
  • Concrete basement floor.

How do you waterproof a basement from the inside?

Apply a masonry waterproofing product to the walls

Seal/coat the interior of the walls with a suitable masonry waterproof product. When the paint dries, the sealant forms a watertight bond to stop water from seeping through. This is how you can waterproof your basement walls from inside.

Can I waterproof my basement myself?

DO apply a masonry waterproofing product to bare interior basement walls. If your foil test showed that water is soaking through your basement walls and leaving them wet, seal the interior of the walls with a high-quality waterproof paint, such as DRYLOK White Extreme Waterproofer (available from Home Depot).

How do I stop water seeping in my basement walls?

Here are eight strategies to keep water out of your basement.

  1. Add Gutter Extensions. …
  2. Plug Gaps. …
  3. Restore the Crown. …
  4. Reshape the Landscape. …
  5. Repair Footing Drains. …
  6. Install a Curtain Drain. …
  7. Pump the Water. …
  8. Waterproof the Walls.

Can you fix a leaky basement from the inside?

Most basement leak repairs, regardless of whether they are performed on brick, cement block, or concrete foundations, can be performed from the inside or the outside of the home. If you have a poured concrete foundation, both interior and exterior waterproofing repairs can be effective in preventing a wet basement.

Why does water come into my basement when it rains?

During periods of heavy or persistent rain, the soil can become saturated, creating hydrostatic pressure (or water pressure) that can push moisture and water through your basement walls and floor. The looser soil around your foundation tends to absorb more water.

Should I waterproof my basement from the inside or outside?

Though labor-intensive and expensive to carry out, waterproofing your basement from outside provides the most efficient way of preventing water and moisture build-up around the foundation of the house.

Can You Use Flex Seal on basement walls?

Flex Seal Liquid is thicker than paint and dries into a strong, rubberized coating. It can also help seal out air, water, and moisture and is chemical and mildew resistant – making it a great choice for your basement walls.

What is the best product to waterproof basement walls?

When sealing basement floors and foundation walls the best concrete sealers to use are the Lithi-Tek 4500 primer followed by the Siloxa-Tek 8510 waterproofing sealer. If you are going to be installing flooring in the basement, it is best to use a moisture vapor barrier coating like the Vapor-Tek 440.

Which Flex Seal is best for concrete?

In the concrete. And although flex seal sounds like a really good option the reality is is it's just not UV stable enough and it's not strong enough for bonding to the concrete. Itself.

How long does flex seal last?

30 years

Q: How long does it last? A: Flex Shot will last up to 30 years and will not fade, dry, crack, yellow or deteriorate.

How do you prepare surface for Flex Seal?

Sanding your surface will increase adhesion for Flex Seal. Once your surface is clean, wipe it dry. Flex Seal works on wet areas, but it’s more effective on dry surfaces. Depending on your project type, you may need painter’s tape to section off the areas you’re looking to treat.

Can Flex Seal stop water leak?

Yes it does! Many users have had great success with using Flex Seal for a variety of uses. Whether you are using it to fix a leak, prepare for a storm or using it as a sealant, we know that you will be impressed with Flex Seal.

Does Flex Seal peel off?

Here we have it one wipe later these are super absorbent. I'm actually pretty impressed as to how much is soaked off of there. I'm gonna dry my hands off with a towel. So you got to see. This. There

Is Flex Seal better than caulk?

Our team reviewed many types of caulk products to ensure we could provide our consumers with a few of the top picks. Our top pick is the Flex Shot Rubber Adhesive Sealant Caulk, because it bonds and seals virtually everything. It’s also convenient to use because it doesn’t require the use of a caulking gun to apply.

What is better flex seal spray or liquid?

Flex Seal’s application is easier, which is pretty normal since it’s a spray. However, the Liquid Rubber sealant is much more cost-efficient, and it works for the previously mentioned materials just as well.