Home Improvement

How do you adjust the sensor light on a HPM?


How do I set my HPM sensor light?

To obtain the correct setting turn knob clockwise until the light comes on at the desired lux level. There will be times when you wish the light to stay on regardless of motion. This may easily be achieved by turning the light off and on again within 1 – 2 seconds.

How do I change my sensor light settings?

Youtube quote:
Use the sensitivity control to adjust the sensor to light up more or less area as needed. Check your adjustment by walking in circles beneath your motion sensor. Again.

How do I reset my HPM sensor light?

The light can be turned off and on again within 1 – 2 seconds. Until manually switched off, the light/s will remain on. To return the Light Patrol to the Auto Mode, turn the power off for 10 seconds.

How do I adjust my LED security light?

Youtube quote:
When adjusting the lights duration refer to the middle time dial the time is adjustable from 8 seconds to 2 minutes rotating. The dial clockwise will lengthen the lights.

How do you adjust the lights on a Arlec sensor?

Turn anti-clockwise to increase ON-time – ideal setting is about 2 o’clock position (approximately 2 minutes). Whilst there is movement within range of the unit, the light will remain ON. When no further movement is detected, the light will switch OFF after the pre-set time has elapsed.

Why won’t my motion sensor lights turn off?

If the motion sensor was triggered during that brief period where the switch was off, your light fixture could possibly be stuck in the auto-on mode. To fix this, cut power to the motion light altogether for a full 10 seconds, and then restore power.

How do you control a sensor light?

Youtube quote:
When the light comes on turn the switch to the off position then wait 5 to 7 seconds before turning it on again. The light should now be off and the motion detection unit reset.

How do you adjust a dusk to dawn light sensor?

Launch the app.



Find the Settings key and click on on your device. Select which light to vary the settings. Adjust light sensitivity settings, brightness, or timer settings from here.

How do I reset my outdoor sensor light?

The best way to reset a motion sensor light is to turn it off and back on again for a period of 30 seconds or longer. A homeowner can also turn the power to it off at the breaker, in order to ensure it has time to reset itself. If that doesn’t work, the sensor itself or the bulb may be to blame.

How do you adjust a photocell sensor?

The Photocell sensor can be adjusted for the light level that the switch activates. This is done with the (“LUX” screw). To adjust when the switch activates, rotate the “LUX” screw between the sun and moon symbols. sun indicates the Photocell sensor will operate at sunrise.

How do I adjust the time on my PIR sensor?

Youtube quote:
Line you have to go past Auto. And then either go to a minute go to five minutes or go to 10 minutes.

What is time on a sensor light?

This is useful if there are street light near by because it might not get dark enough for it to activate. TIME: Time controls how long you want it to activate for there will be a plus and a minus sign moving it to the + will give you more time and the – will give you less.

Adblock
detector