Most motion detectors are activated and deactivated using an automatic mode. It uses the power supply, which in this case is the wall switch. To restart a motion detector light, turn off the wall switch, wait about 6 seconds, then turn it back on.
Why does my outdoor sensor light stay on?
Your motion sensor light stays on. These lights are designed to go off after movement has ceased, generally within 30 to 60 seconds. If your motion sensor light won’t go off or stays on for long periods of time, it may require a reset.
Why won’t My dusk to dawn light go off?
If your dusk to dawn light does not turn off, this can be because there is no sunlight in the area or you placed it in a room where it is dark. Take note that there is a sensor that triggers the light to turn on and off. If the sensor is not sensing enough light in the area, it will continue to stay on.
Why is my security light not turning off?
If your outdoor security light won’t turn off, it’s most likely because of one of these problems: The sensitivity settings are too high. The duration settings are too high. It’s stuck in auto mode.
Why won’t my motion sensor lights turn off?
If the motion sensor was triggered during that brief period where the switch was off, your light fixture could possibly be stuck in the auto-on mode. To fix this, cut power to the motion light altogether for a full 10 seconds, and then restore power.
How do you turn off outdoor motion sensor lights?
The only way to turn off the override function is to turn the switch off and wait for 30 seconds to 1 minute before you turn it on again. This should reset the sensor so that it works on motion detection again.
How do you fix an outdoor motion sensor light?
How Can You Fix Motion Sensor Lights?
Try Cleaning the Photocell. The photocell is an important part of the motion sensor light. …
Turn It Off and Back On. Believe it or not, sometimes all your motion sensor lights need is to be manually switched off and on again! …
Replace the Batteries. …
Replace the Bulb.
Why is my security light not working?
The Light Won’t Come On
Turn off the circuit breaker that controls the light circuit and leave it off for 30 minutes. Turn on the breaker and see if the light comes on. If it does, adjust the sensor range and sensitivity as needed. If the light doesn’t come on when you turn the breaker back on, try replacing the bulb.
Why is my sensor light not working?
The best way to reset a motion sensor light is to turn it off and back on again for a period of 30 seconds or longer. A homeowner can also turn the power to it off at the breaker, in order to ensure it has time to reset itself. If that doesn’t work, the sensor itself or the bulb may be to blame.
