Think about the bathroom design as a whole and what shower tile will compliment.
Choose a tile that complements the intended design of the bathroom.
Look at the ceilings and walls to understand the color scheme to help decide if the shower should be bold or neutral.
What type of tile is good for shower walls?
Page Contents
Ceramic / Porcelain
Ceramic / Porcelain One of the most popular and traditional types of tile used on shower walls are ceramic or porcelain tiles. This man-made material comes with a baked-on clear protective glaze. That makes it super low maintenance and an extremely durable tile option.
1-inch square to 12-inch square, or up to large-format
Bathroom walls
4-inch square up to 12-inch by 24-inch
How do you figure tile for a shower?
Measure the Shower Area
Start on one shower wall and use a measuring tape to measure the length as well as the width of the wall needing tile. Multiply the length and width together and divide by 144 to determine the square footage of that wall. Repeat for all other walls in the shower area.
Do small or large tiles make a shower look bigger?
Also, using large tiles in a small space can actually make it appear larger. That’s because there are fewer grout joints, which reduces the lines that appear across the floor. Tip #4: Keep tiling consistent throughout the space. Tile the shower floor and the threshold (curb) in the same color as the bathroom floor.
Should you use ceramic or porcelain tile in a shower?
As porcelain is nearly waterproof, porcelain tiles are the best material to use when installing a wet room due to the levels of moisture. Ceramic is perfect to use all over in a standard bathroom especially with the wide choice of designs available including some with anti-slip properties.
What is the easiest shower tile to keep clean?
You can find different porcelain tiles, but the easiest to clean tile is the polished or glazed porcelain tile. You can clean these tiles by sweeping off any extra dust, mopping them with a cleaning solution, rinse with water, and wiping them dry, which will give you the best results.
What is the most popular tile for bathrooms?
The 10 Most Popular Types of Bathroom Tiles
Porcelain tiles. If you want your bathroom tiles to last a long time, porcelain is the ideal material to choose. …
Ceramic tiles. …
Marble tiles. …
Mosaic tiles. …
Limestone tiles. …
Slate tiles. …
Vinyl tiles. …
Pebble tiles.
Should bathroom floor and wall tile be the same?
Should bathroom floor and wall tiles match? Using the same types of tile on the wall and floor is most common in modern bathrooms as it creates a seamless finish and often makes a room feel bigger. However, it is all down to personal taste and style.
What is the difference between porcelain tile and ceramic tile?
The major difference between porcelain tile and ceramic tile is how it’s made. Both tiles are made from a clay mixture that’s fired in a kiln, but porcelain tile is made from more refined clay and it’s fired at higher temperatures. This makes it denser and more durable than ceramic tile.
Should you use large tiles in the shower?
Yes, it’s entirely possible to use larger size tiles on your bathroom floor. However, you need to ensure your shower pan meets the criteria listed earlier. Make sure you choose a set of tiles that have a COF above 0.6. This rating provides the best grip in the shower to prevent slip-and-falls.
How wide should a vertical accent tile be in a shower?
Typically the accent wall will be around 5-foot wide by 10-foot tall. That is 50 square feet, give or take a little. We have beautiful Porcelain Tile Accents that are under $5 square foot.
How high should bathroom tiles be?
The classic design feature is usually between 34 and 54″ high, with 36″ being the average height. A classic offset or straight set pattern in a standard field size tile works best for this wall height. For a truly classic look, finish the top with a decorative trim or a bullnosed edge.
Should you tile halfway up bathroom wall?
One of the most common questions when it comes to decorating the bathroom is: “Should the walls be fully tiled or half tiled?” The answer is that there is no “right” way. It’s not a matter of fully-tiled being better than half-tiled. Rather, both are different but equally good ways to decorate your bathroom walls.
How far above the shower head should the tile go?
Tiles should cover ¾ of the bathroom walls depending on the bathroom wall height and 4-6” above the showerhead.
Should you tile behind a toilet?
Experts always recommend tiling behind a toilet tank to protect your surface from water damage and extra humidity.
What order should I tile my bathroom?
The tile installation principle is that the tiled wall ‘hangs’ over the tiled floor. The best way to achieve this outcome is by first tiling the floor so that the wall tile will then seem to be ‘sitting’ on the bathroom floor.
When tiling a bathroom where do you start?
You typically want to start your bathroom tile installation in the back corner. But if you just start tiling from the back corner, your most visible areas will not line up as planned. Instead, carefully layout the floor tiles with the tile spacers in between them.
Should toilet sit on top of tile?
The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first.
Do you tile wall or floor first?
Whilst you can tile either one first, popular opinion based on experience is that is is easier to tile the walls first and then the floor, if you are tiling both in a room. This ensures that you keep the floor tiles cleaner as you won’t be doing so much work around them once they are installed.
Should you grout under toilet?
If the toilet sits securely to the floor without rocking or leaving any noticeable gaps, it is not technically necessary to grout or caulk the toilet to the floor. This is a matter of aesthetics and personal preference.
Do you tile before fitting a shower?
We always advise fitting the shower tray before tiling the walls or installing wall panels as this ensures a more watertight seal around the sides of the tray.
Do tiles go on top of shower tray?
While some guides may recommend tiling behind the shower walls, you should indeed tile on top of the tray. To save time, tiling and plastering can be carried out at once in the bathroom to get the shower area the way it needs to be.
Should I grout shower tray and tile?
Grout isn’t suitable for sealing around your bathtub or shower tray as it’s not flexible and will crack as soon as any weight is placed on the tub or tray.
What goes first shower pan or walls?
Whether you choose to install tile or the panel walls, drywall always goes on top of the shower pan, after the pan is set into the floor.
What is the best backer board for a shower?
Cement board is a good, reliable backer board that works well on both floors and walls. Keep in mind that most tile setters err on the side of caution and brush a waterproofing membrane on top of cement board when it is in wet areas like showers or tub surrounds.
Do you put cement board under a shower pan?
The wallboard must be installed 1/8 inch above the shower pan. If the shower pan is not in place, the wallboard height must be guessed, which can lead to inaccuracies and an expansion gap that is too large or too small.
